汽车同步器齿环用耐高温结构胶膜的性能研究

同步器齿环与碳纤维耐摩擦材料是通过胶粘剂实现粘接,而胶粘剂耐高温性能的优劣则是决定其使用寿命的决定性因素。本文研究了环氧树脂E-51体系、环氧树脂AG80体系以及基材表面处理工艺对于结构胶膜耐高温性能的影响,采用熔融共混法制备了胶粘剂并以玻璃纤维布为背衬制备了耐高温结构胶膜。采用高低温拉力机对不同体系制备的结构胶膜进行了常温、200℃高温的钢材搭接剪切强度的测试。结果表明,对于E-51体系,提高体系交联密度可显著增大常温剪切强度,但高温剪切强度明显下降;对于四官能度的AG80体系,AG80的用量是影响其高温性能的主要因素,同时基材表面喷砂水洗处理后可显著增大结构胶膜与基材粘接有效面积,进而显著改善高温性能。所制备的结构胶膜较常用胶粘剂使用更加便捷,耐高温性能优良,满足同步器齿环使用要求。     

基于双向流固耦合弹性环式挤压油膜阻尼器建模及动力学特性研究

利用数值方法建立了弹性环式挤压油膜阻尼器(ERSFD)的流固耦合模型,分别利用有限元方法以及有限体积法建立了弹性环和内外油膜的CFD数值模型,并进一步利用分时迭代的弱耦合方法实现了油膜以及弹性环控制方程的耦合求解,获得了内油膜的压力分布特性及弹性环的变形,并进一步识别了油膜和弹性环的动力学特性系数;研究了涡动频率、凸台数目、凸台高度、凸台宽度以及弹性环厚度对阻尼器动力学特性系数的影响。结果表明,弹性环的凸台高度对ERSFD油膜动力学特性系数的影响最为明显,ERSFD油膜阻尼与涡动频率无关。     

膨胀剂对约束条件下UHPC早期抗裂性能影响的试验研究

超高性能混凝土(UHPC)在钢桥面铺装结构中由于铺装材料受到钢板、栓钉等的约束,加上材料本身水胶比小,更易收缩,早期容易承受拉应力导致开裂。通过在拌和过程中添加膨胀剂可以起到减小收缩的作用,但该方法对于约束条件下的UHPC铺装的早期抗裂性能提升是否有促进作用,仍需通过更多试验进行合理评估和深入研究。通过圆环法对3组不同配方的UHPC在均匀约束条件下的早期抗裂性能进行定量测试,并将试验数据进行回归分析和计算,得到了各组的平均应力发展速率,进而评估了各组的开裂风险等级。试验结果表明,通过在UHPC中加入适量膨胀剂,可使其最终收缩应力减小,并可降低其收缩应力发展速率,进一步降低其在约束条件下的开裂风险。     

多晶硅生产中残液搅拌罐密封结构的改造

在处理多晶硅生产中产生的残液时,残液搅拌罐填料密封出现泄漏,针对此问题提出了优化措施,达到了预期效果。     

Morpholine As a Scaffold in Medicinal Chemistry: An Update on Synthetic Strategies

Morpholine is a frequently used heterocycle in medicinal chemistry and a privileged structural component of bioactive molecules. This is mainly due to its contribution to a plethora of biological activities as well as to an improved pharmacokinetic profile of such bioactive molecules. The synthesis of morpholines is a subject of much study due to their biological and pharmacological importance, with the last such review being published in 2013. Here, an overview of the main approaches toward morpholine synthesis or functionalization is presented, emphasizing on novel work which has not been reviewed so far. This review is an update on synthetic strategies leading to easily accessible libraries of bioactives which are of interest for drug discovery projects.     

Physical and thermal properties of l‐lactide/ϵ‐caprolactone copolymers: the role of microstructural design

Understanding the underlying role of microstructural design in polymers allows for the manipulation and control of properties for a wide range of specific applications. As such, this work focuses on the study of microstructure–property relationships in l‐ lactide/?‐caprolactone (LL/CL) copolymers. One‐step and two‐step bulk ring‐opening polymerization (ROP) procedures were employed to synthesize LL/CL copolymers of various compositions and chain microstructures. In the one‐step procedure, LL and CL were simultaneously copolymerized to yield P(LL‐stat‐CL) statistical copolymers. In the two‐step procedure, poly(l‐ lactide) (PLL) and poly(?‐caprolactone) (PCL) prepolymers were synthesized in the first step before CL and LL respectively were added in the second step to yield P[LL‐b‐(CL‐stat‐LL)‐b‐LL] and P[CL‐b‐(LL‐stat‐CL)‐b‐CL] block copolymers as the final products. The findings reveal that, in addition to the copolymerization procedure employed, the length and type of the prepolymer play important roles in determining the chain microstructure and thereby the overall properties of the final copolymer. Moreover, control over the degree of crystallinity and the type of crystalline domains, which is controlled during the polymer chemistry process, heavily influences the physical and mechanical properties of the final polymer. In summary, this work describes an interesting approach to the microstructural design of biodegradable copolymers of LL and CL for potential use in biomedical applications. © 2019 Society of Chemical Industry     

印尼BAYAH电厂一次风机故障原因分析与处理

本文针对印尼BAYAH电厂一次风机设备故障，详细的分析了故障产生的原因，介绍了三点法找转子动平衡和工装车削式在线修复电机滑环工法，阐述了两种工法的原理以及实施步骤。     

高精度多环片自动装配控制技术

为了实现对微小环片零件的自动化装配,搭建了自动装配系统.通过4根直线导向轴与4个直线轴承来提高系统的导向精度和刚度.采用直线导轨进行各装配作业模块之间的切换,保证了微小环片零件的自动装配与取出.在环片的装配方向上,螺旋升降机和光栅尺实现环片的位置精度控制.在Lab VIEW编程环境中,采用分层软件架构和模块化控制思想,避免了不必要的数据循环检测与丢失,能够达到环片组件的装配精度要求.控制系统分为系统初始化模块、参数设置模块、装配模块和取出模块,自动装配系统通过各个模块间的相互交流配合完成装配任务.采用本文中自动装配系统装配环片的实验结果表明,环片零件装配的最大位置误差为26μm,垂直度误差为17μm,平均装配时间为75 s/片,可满足环片组件所需的精度要求.     

Do people put more value on electricity produced using waste-to-hydrogen? Findings from South Korea

South Korea is pushing for the waste-to-hydrogen (W2H) project to reduce greenhouse gases and utilize plastic and vinyl waste (PVW) while reducing environmental pollution from PVW. This research seeks to estimate additional willingness to pay (WTP) for electricity produced using W2H over that produced using traditional power sources, such as coal and nuclear. For the purpose of the estimation, a contingent valuation survey of 1000 people was performed employing the closed-ended one-and-one-half-bound question during November 2020. A spike model is utilized to reflect zero WTP values that a number of interviewees reported in the survey. Several factors affecting the additional WTP were also analyzed to derive implications. The average WTP was computed as KRW 27.7 (USD 0.025) per kWh with statistical significance, which reaches 26.4% of the electricity price. One more point to note is that 54.3% of the respondents stated a zero WTP as they thought that W2H is of no value to them or were worried that the W2H project could increase electricity bills.